83
90
20
3x1,5mm2
3x1,5mm2
4x0,75mm2
N L
ENGLISH
11 START-UP
Black
Earth
Blue
or
greygrey
Brown
Connect the yellow green cable to earth.
Connect the cables shown in the figure to the
230 V mains supply
1)
2)
According to the type of installation,
check if the push-button is correctly
wired. The shutters should open if you
press the Open key - if this does not
happen, change over the motor’s two
phases (brown and black cables).
The NIGHT ONE DAY is commanded by a push-button
and operates in dead-man logic (As long as you press
the push-button, the motor will turn in the selected
direction).
The NIGHT ONE DAY AUTO is commanded by a switch
and automatically stops moving as soon as it meets
an obstacle or the opening/closing stop point.
11.2 OPEN/CLOSE selector switch for mod. NIGHT ONE DAY and NIGHT ONE DAY AUTO
The figure shows the dimensions and electrical connections of the OPEN/CLOSE selector switch of the
mod.
NIGHT ONE DAY a�d NIGHT ONE DAY AUTO
0 Vac
0-0Hz
Fig. 34
Fig. 35
N = Blue or grey
Blue or grey
grey
L = brown
11.1 Electric wiring for mod. NIGHT ONE DAY and NIGHT ONE DAY AUTO
Summary of Contents for Night ONE Day
Page 1: ...Night ONE Day...
Page 2: ......