FAAC MiniTIME SA, Installation Manual And User Manual

Page: 5 / 7

MiniTIME SA: Installation Guide and User Guide
5.3 Menu 3 – Activating a user code / card
This function enables to user to change the access configurations for either a single user or a group of locations. For
every title it’s possible to set the gate and “direction” (absent/present), it is also possible to enable the anti pass
back check.
To enter the menu read paragraph Errore. L'origine riferimento non è stata trovata. – Errore. L'origine riferimento
non è stata trovata.
T
IPO DI COMANDO
D
ESCRIZIONE
NNN#CE Executes the C command on the NNN location
NNN#FFF#CE Executes the C command on the FFF location
1111#CE Executes the C command on all the locations.
C
OMANDO
D
ESCRIZIONE
E
SEMPIO
5 Forces the “absent” status 37#5E Title 37 Absent
6 Forces the “present” status 116#6E Title 115 Present
7 Enables the “Anti PASS ‐ BACK” check 21#7E Title 21 enabled with Anti PASS ‐ BACK
check
8 Disables the “Anti PASS ‐ BACK” check 3#8E Title 3 not enabled with Anti PASS ‐ BACK
check
GHJK The configuration is changed for both A and B readers
G = 1: a read on A commands the exit 1
G = 0: a read on A does not command the exit 1
H = 1: a read on A commands the exit 2
H = 0: a read on A does not command the exit 2
J = 1: a read on B commands the exit 1
J = 0: a read on B does not command the exit 1
K = 1: a read on B commands the exit 2
K = 0: a read on B does not command the exit 1
7#1100E
7#0011E
7#1010E
7#0101E
7#1001E
7#0110E
7#0000E
Title 7 opens A and B if read on A
Title 7 opens A and B if read on B
Title 7 opens A if read by A and B
Title 7 opens B if read by A and B
Title 7 opens A of read by A
Opens B if read by B
Title 7 opens B if read by A
Opens A if read by B
Title 7 disabled
GH The configuration is changed on reader A
G = 1: a read on A commands exit 1
G = 0: a read on A does not command exit 1
H = 1: a read on A commands exit 2
H = 0: a read on A does not command exit 2
9#00E
9#01E
9#10E
9#11E
Title 9 disabled
Title 9 opens B if read by A
Title 9 opens A if read by A
Title 9 opens A and B if read by A
NOTE: the A reader is the automatic decision ‐ making reader. The reader B is the remote reader which does not
have the “automatic decision ‐ making” feature.
5.4 Menu 4/5 – Data Import/Export
To enter the menu read paragraph Errore. L'origine riferimento non è stata trovata. – Errore. L'origine riferimento
non è stata trovata.
The menu n. 4 is used for importing data, the menu 5 is used for exporting data.
These menus are used for saving the settings and the codes whenever a backup or an export operation is needed.
C
OMANDO
D
ESCRIZIONE
C
OMANDO
D
ESCRIZIONE
1E Complete Import/Export 2E Settings and Codes import/Export
3E Codes Import/Export 4E Settings Import/Export
Pag. 5