19
Modifying access codes
After you have typed in the access code for displaying
the system’s status, press the configuration access
push-button.
Select the
ACCESS CODES
menu, and then confirm.
Codes 2 and 3 are secondary codes and, contrary to
code 1, do not allow access to the configuration
menus.
Select which of the three codes you wish to modify
and confirm with
.
Select a new code with
, and then confirm
with :
ACCESS CODES
are shown on the keypad
display.
OK
OK
+
-
OK
OK
CUSTOMISING mode
After you have typed in the access code for displaying
the system’s status, press the configuration access
push-button.
Select the
LEARNING
menu, and then confirm.
The countdown begins (from 69 to 0): the keypad and
the control unit exchange the information required for
customising the keypad.
When the countdown has finished,
NAME DEVICES
is
shown.
C
INFO
OK
+
-
OK
OK
+
-
C
INFO
INFO
+
-
OK
OK
+
-
C
INFO
OK
C
INFO
OK
+
-
OK
OK
+
-
C
INFO
INFO
+
-
OK
OK
+
-
C
INFO
OK
OK
OK
+
-
C
INFO
+
-
OK
OK
+
-
C
INFO
INFO
OK
OK
OK
+
-
C
INFO
OK
OK
OK
+
-
C
INFO
+
-
OK
OK
+
-
C
INFO
OK
OK
OK
+
-
C
INFO
+
-
Impor
Impor
tant:
tant:
Some operations, such as
NAME DEVICES
or
SURVEILLANCE AREA CREATION
must necessarily
be preceded by a learning session, so that the control
keypad can record the necessary information.
Customising
