5.5
The ESTATE SLIDE operator is supplied with a Two magnets that trigger limits built into the
motor that need to be secured to the top of the rack. This triggers gate movement to stop in the
open and closed position.
1. Move the gate to the closed position.
2. Attach the one of the magnets as seen in the picture so it is triggering the limit.
3. Repeat for open position.
The correct positioning of the closed plate can be checked later after powering up the unit. The
FCC limit light (above M2 terminal block) will go off when the closed limit is tripped/ The open
limit can be confirmed by the FCA limit light going off.
If the incorrect light is turning off the wires in FCC and FCA on the M2 terminal block must be
switched.
Travel Limit Magnet Installation
Summary of Contents for Estate Slide
Page 1: ...Instruction Manual for the Manufactured by E SL 1800 Series ...
Page 15: ......
