Kit E850S
16
532181 - Rev.A
51
52
53
54
55
56
2 -CL -
1 -R.CL -
4 -R.OP -
3 - OP -
Tr
ansla
tion of the original instruc
tions
ENGLISH
OPENING TO THE RIGHT
9
Opening to the right
function
cam to be adjusted
direction of
adjustment
closing
cam 2
closing deceleration
cam 1
opening deceleration
cam 4
opening
cam 3
1. Close the gate as far as the required closed position. The closed
position must be at least 10 cm from the external mechanical stop.
2. Using a screwdriver, turn screw number 2 clockwise until the cam
engages the micro switch, as shown in
51
. When the micro
switch is activated, the LED DL6 (CL) turns off.
3. Open the gate as far as the required closing deceleration starting
point.
4. Using a screwdriver, turn screw number 1 clockwise until the cam
engages the micro switch, as shown in
52
When the micro
switch is activated, the LED DL8 (R.CL) turns off.
5. Open the gate as far as the opening deceleration starting point.
6. Using a screwdriver turn screw number 4 anticlockwise until the
cam engages the micro switch, as shown in
53
. When
the
micro switch is activated, the LED DL7 (R.OP) turns off.
7. Open the gate as far as the required open position. The open
position must be at least 10 cm from the external mechanical stop.
8. Using a screwdriver turn screw number 3 anticlockwise until the
cam engages the micro switch, as shown in
54
. When
the
micro switch is activated, the LED DL5 (OP) turns off.
!
Tighten the central screw of the limit switch unit by one turn (
55
).
Replace the cover of the limit switch unit using the screws that were
put aside previously
(
56
)
.
Summary of Contents for E850S
Page 1: ...Kit E850S Translation of the original instructions...
Page 19: ......
