a
a
c
b
c
306
225
Fig. B
Fig. F
Fig. C
Fig. D
Fig. E
230v -> 2,5A - 250v
115v -> 4A - 120v
Fig. A
130
64
0
BOX LAYOUT
Fig. B shows the four 5 mm diam. holes for securing the box
(ref.
a
) to the wall, the three fittings M16/M20/M25 for installing
the cable grippers (ref.
b
) and the two lid hinges (ref.
c
).
THE bOX CONTAINS THE E024S ELECTRONIC uNIT AND
THE DEvICES TO pOWER IT. IT MuST THEREFORE bE HAN-
DLED WITH CARE DuRING ALL INSTALLATION STAGES, TO
AvOID DAMAGING ITS COMpONENTS.
The dimensions of the box are shown in Fig.A:
The lid hinges can be moved upward to allow opening the box
housing (Fig. C); they can also be removed and re-positioned
in order to enable the lid to open to the right or left.
When you have secured the box in the selected position, cover
the securing holes (ref.
a
Fig.B) and the screws with the supplied
plugs as shown in Fig.D.
After you have finished the operations to connect the control
board with the various parts of the automated system, close
the box, positioning the lid in its seat with seal.
Connect the supply as shown in Fig. E.
Dimensions in mm
ELECTRICAL bOX E024S
Next, tighten the four supplied screws to guarantee the degree
of protection against external agents (Fig.F).
ENGLISH
2
Summary of Contents for E024S
Page 1: ...E024S...