![background image](http://html1.mh-extra.com/html/faac/apn/apn_manual_3124755010.webp)
9
3
2
1
4
1
2
3
x2
x2
25
88
ENGLISH
Install the carriages on the top profile as shown in fig.
(the figure shows the carriages of the 940 model).
When you have finished the job, position the leaf on the
automated system.
To position the carriages, refer to the specific instructions
for the individual automated doors.
Adjust height with the dowel
. Tighten the locking dowels
and
to lock the adjustment.
Referring to the figure below, adjust the height of the
anti-panic release (ref.
) in order to enable correct
coupling with the hook-on block (fig. ). Withdraw the
anti-panic release unit from the top profile, tighten the
securing dowel (ref.
), and then secure the release unit
to the top profile, tightening the two screws ref.
.
Insert a hexagon Allen wrench (ref.
) in the appropriate
hole of the release unit, in order to adjust the hardness of
the mobile leaf release unit.
To facilitate tightening the dowel, you may drill a hole in
the top profile at the dowel location point.
Install the closing plugs, using the supplied screws as shown
in fig. .
If necessary, cut the leaf profile as shown in fig. , and
secure the hook-on block with the two supplied screws.
Loosen the two securing screws of the anti-panic release
unit (fig. ref.
) and couple it with the block you have
just fastened.
Summary of Contents for APN
Page 1: ...APN ...