FAAC A1400 AIR RD, Manual

Page: 90 / 118

A1400 AIR RDT 90 532119 04 - Rev. C
OK OK
OK
OK
OK
OK
OK
ENGLISH
ITALIANO
FRANÇAIS
DEUTSCH
ESPANOL
NEDERLANDS
Tr
ansla
tion of the original instruc
tions
ENGLISH
MENU 1 LANGUAGE
Default: ITALIANO
-- 16 Night-time 16 Night-time
-- 17 Manual 17 Manual
3. If the input has not been disabled, select the logic:
- Normally open (NO)
- Normally closed (NC)
4. If an input with CLOSURE SAFETY function has been selected, set
the TEST:
- Enabled
- Disabled (Default)
5. Repeat the procedure for the other inputs.
2 Outputs O1 / O2
1. Select an output. The complete list with relevant default is:
- O1 Gong
- O2 Door not closed
2. Select function:
- 0 Disabled
- 1 Gong
- 2 Error
- 3 Battery
- 4 Emergency active
- 5 Test (for I1,I2,I3 and I4)
- 6 Door not closed
- 7 Door open
- 8 Door in motion
- 9 Light*
- 10 Intrusion active
(* ) If this function is selected, set the time:
- from 1s to 255s (Default 60s)
3. If the output has not been disabled, select the logic:
- Normally open (NO)
- Normally closed (NC)
4. Repeat the procedure for the other output.
3 Safety devices S1-S4
1. Select a SAFETY input. The complete list with relevant default is:
- S1 DISABLED
- S2 DISABLED
- S3 CLOSING SAFETY / TEST ENABLED / NC
- S4 CLOSING SAFETY / TEST ENABLED / NC
2. Select function:
- Disabled
- Closing safety
- Opening safety
3. If the input has not been disabled, set the TEST:
- Enabled
- Disabled
4. If the input has not been disabled, select the logic:
- Normally open (NO)
- Normally closed (NC)
5. Repeat the procedure for the other inputs.
4 Sensors I / E
1. Select a sensor. The complete list with relevant default is:
- SENSOR I Internal current
- SENSOR E External contact NO
2. Select the function for Sensor I (Internal Sensor):
- Internal current
- Internal frequency
- Disabled
3. Select the function for Sensor E (External Sensor):
- Disabled
1
LANGUAGE
MENU 2 PROGRAMMING
 
The menu is only accessible if the INSTALLER password has been
entered.
If a different password has been inserted, it is indicated: MENU
RESERVED FOR INSTALLERS.
The list is:
- 1 INPUTS / OUTPUTS
- 2 MOTION
- 3 TIMING
- 4 ENERGY SAVING
- 5 BATTERY KIT
- 6 MOTOR BLOCK KIT
- 7 INSTALLATION
- 8 SUNDRIES
- 9 LOG
■
INPUTS / OUTPUTS
OK OK INPUTS / OUTPUTS
2
PROGRAMMING
1 Inputs I1- I4
1. Select an input. The complete list with relevant default is:
- I1 OPEN AUTOMATIC / NO
- I2 OPEN EXTERNAL / NO
- I3 KEY / NO
- I4 OPEN SEMI-AUTOMATIC / NO
2. Select function:
-- 0 Disabled 0 Disabled
-- 1 Open total 1 Open total
-- 2 Open external 2 Open external
-- 3 Exit only 3 Exit only
-- 4 = Open automatic 4 = Open automatic
-- 5 = Open semi-automatic 5 = Open semi-automatic
-- 6 Pharmacy 6 Pharmacy
-- 7 Key 7 Key
-- 8 Closure safety 8 Closure safety
-- 9 Open internal 9 Open internal
-- 12 Timer 12 Timer
-- 13 Partial 13 Partial
-- 14 Opening safety 14 Opening safety