FAAC A1400 AIR RD, Manual

Page: 73 / 118

A1400 AIR RDT 73 532119 04 - Rev. C
Tr
ansla
tion of the original instruc
tions
ENGLISH
15. DIAGNOSTICS AND PROCEDURES
 14
Statuses of the automation
Status of the automation
00 00 CLOSED
01 01 in OPENING
02 02 OPEN
03 03
in PAUSE
04 04
in NIGHT-TIME PAUSE
05 05 in CLOSING
06 06 OPEN in EMERGENCY
07 07 in MANUAL mode
08 08
in NIGHT-TIME mode
09 09
Opening with Auxiliary_motor
10 10 System TEST in progress
11 11 STAND-BY
12 12 Safety TEST in progress
13 13 OPEN in ERROR (Press simultan and - to display the active
ERROR)
(
*
)
L0-L2 L0-L2 PHASES L0, L1, L2 of SETUP in progress (flashing)
(
*
)
Status
13 13
is caused by an error which stops the door in open status and prevents
closure. To restore operation, remove the cause and perform a RESET.
15.1 ACOUSTIC SIGNAL
When the time set for the maintenance to be performed elapses, the
control board beeps at each closure indicating a maintenance request:
3s

 
The maintenance request is set by default upon reaching the MAX
number of cycles: 1 000 000.
With SDK EVO it is possible to:
- modify the number of cycles for maintenance request
- enter a maintenance request date (optional).
!
The acoustic signal is DISABLED in NIGHT-TIME mode and in case of
BATTERY operation.
15.2 SYSTEM DIAGNOSTICS: ALERTS, ERRORS
The display reads
- automation STATUSES
 14
.
- ERRORS identified by the RED LED DL4 STEADY on interrupt auto-
mation operation. If several errors are present at the same time,
each error is signalled after resolving the previous one. See
 15
.
- ALERTS of conditions/phase in progress, identified by the RED
LED DL4 blinking are described in
 16
.
 
To check active ERROR/ALERT code, press simultan and
-
0.0
RESET/SETUP
DL2
+
- F
J
13 13
Al Al
+ alert code
DL4
o
Er Er
+ error code
DL4
+
-