23
ENGLISH
ENGLISH
FAAC 950 BM
Fig. 1
1
Cable hole
2
Support profile
3
950 I/O electronic control unit
4
Adjustment of internal
mechanical stops.
5
Transmission shaft coupling
6
Protection for drive system and
re-closure spring.
7
DC motor
8
950 MPS programming unit
9
Toroidal transformer
10
Mains power terminal board.
11
Casing securing bracket
12
Earth lug
13
Power cable terminal
The 950 BM automated system for swing doors is an enbloc unit
consisting of an electromechanical device that allows door
opening to be controlled by means of a driving arm. The door is
re-closed by a spring system.
The operator can be installed either on the lintel or on the door
structure itself.
The ABS-plastic protective casing houses the electronic control
unit used to program and control the operation of the system.
In the event of a power failure the door can be pushed (or pulled)
open manually.
1. DESCRIPTION AND TECHNICAL CHARACTERISTICS
Table 1: Technical specifications of 950 BM Operator
Power supply
230 Vac (+6 -10%) - 50 (60) Hz
Absorbed power
100 W
Absorbed current
0,5 A
Electric motor
24 Vdc with encoder
Dimensions
530x105x160 mm (length x height x depth)
Weight
10 Kg
Operating ambient temperature
- 20 + 55 °C
Protection class
IP 23 (internal use only)
Dimensions and leaf max weight
see Table 3 (paragraph 1.1)
Use frequency
continuous
Operation in event of power failure
Manual push/pull
opening
Configuration of driving arms
• pushing articulated arm
(version for jamb depth 0
¸
250 mm)
• sliding arm (arm length 430 mm)
• sliding arm (arm length 330 mm )
Anti-crushing device
standard
Opening angle
see table 5-6
Opening speed
4
¸
10 s (adjustable)
Closing speed
4
¸
10 s (adjustable)
Table 2:
Technical specifications of Control Board
950I/O and Control Board 950 MPS
Power supply
230 Vac (+6 -10%) - 50 (60 Hz)
Accessories power supply
24 Vdc / 500mA max
Electric lock power supply (N.O./N.C.)
24 Vdc / 500mA max
Standard operating functions (selector switch)
Open / Automatic / Manual
(Night)
Adjustable functions (trimmer)
Opening speed - Closing speed
Pause time
Selectable functions (microswitches)
Closing stroke -
Standard/slide initialisation procedure
Push and Go - Function selector switch (pos.”2”)
STOP safety device operation - RS232 port
Terminal board outputs
Malfunction alarm signal -
Electric lock power supply (N.O./N.C) -
24 Vdc accessories power supply - Door status signal
Changeover relay controlled by Card Reader -
“Two-leaf door” signal - “Interlock” signal
Terminal board inputs
Internal / external Commands -
Emergency Command - Key Command -
Card Reader Command - Fire-alarm Command
STOP Safety device - CLOSING Safety device
Rapid connectors
KP-CONTROLLER (optional) -
Minidec, Decoder or RP cards connection -
Functions selector switch connection
1.1. APPLICATION LIMITS
Important
:To ensure correct application of the FAAC 950 BM unit
the weight of the door must not exceed the value given in Table
3 referred to its length.
The maximum length of the leaf is 1400 mm.
The values of maximum weight vary according to the driving arm
used.
For each driving arm there is also a different maximum value for
the depth of the jamb (Table 4) beyond which it is not possible
to install the system correctly.
Table 3: Application limits of 950 BM automated system
Leaf length
Max leaf weight (Kg)
Max leaf weight (Kg) Max leaf weight (Kg)
( m m )
Pushing articulated
Sliding arm
Sliding arm
a r m
L=330mm
L=430mm
700
367
286
-
750
320
249
-
800
281
219
-
850
249
-
194
900
222
-
173
950
199
-
155
1000
180
-
140
1050
163
-
127
1100
149
-
116
1150
136
-
106
1200
125
-
97
1250
115
-
90
1300
107
-
83
1350
99
-
77
1400
92
-
71
Table 4: Max jamb depth
Pushing
articulated
arm
Sliding
arm
L=330
Sliding
arm
L=430
0 - 250
0 - 160
0 - 160
m m
1
2
3
4
5
6
7
8
9
10
11
12
13
