28
ENGLISH
ENGLISH
15
KEY Command - N.O. Contact
Any pulse generator (pushbutton, sensor, etc.) which, by
closing a contact, commands door opening.
To install several pulse generators as Internal Command,
connect the N.O. contacts in parallel.
16
FIRE-ALARM Command - N.O. Contact
Any device (fire-alarm sensor, etc.) which, by closing a
contact, commands door closing.
Permanence of the closed contact, inhibits operation of any
other pulse generator.
To install several devices as FIRE-ALARM Command, connect
the N.O. contacts in parallel.
17
CARD READER Command - N.O. Contact
Any device (card reader, digital buttonboards, etc.) which,
by giving a 24Vdc pulse, commands the door opening and
the activation of the changeover relay (terminals 20/21/22,
J6 terminal board). The open pause time is fixed at 10 sec.
18 - 19 GND
Accessories power supply Negative and contacts Common
J5 TERMINAL BOARD
Connection to relay Outputs (figs.
13,14, 15)
Description of the terminal board
1
Electric lock - Common
2
Electric lock - N.O. Contact (max. capacity 0.5 A/24 V)
(fig.13).
If no power is supplied the electric lock is active and therefore
guarantees closing mechanical locking.
In the NIGHT function the electric lock is active even if no
power is supplied. In the event of an opening command (Key
or EMERGENCY command), the electric lock is temporarily
powered to enable the door to be opened. In this case a
reverse stroke command is also given to enable the
mechanical release of the system.
7 8 9 10
1 2 3 4 5 6
J5
J4
max 0.5A/24Vdc
1 2 3 4 5 6
7 8 9 10
J5
J4
max 0.5A/24Vdc
1 2 3 4 5 6
DOOR
OPEN
DOOR
CLOSED
COM.
max 0.5 A/24 Vdc
15 16 17 18 19
CARD READER - 24Vdc Signal
C. R. Comand
GND
+
-
22 23 24 25 26
max 0.5 A/24 Vdc
ALARM Output
ALARM Output
+24 Vdc
GND
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
J4
J5
J6
J6
J6
25 26 27 28
Interlock Signal
2 Leaf Signal
20 21 22
Com. changeover Relay
N.O.
changeover Relay
N.C.
changeover Relay
