20
ENGLISH
ENGLISH
Fig. 23
Fig. 24
Fig. 25
AUTOMATIC
MANUAL
6.
TESTING THE AUTOMATION
When installation is complete, affix the danger warning label to
the top of the casing (Fig. 23). Thoroughly check operation of
the automation and all connected accessories.
7.
MANUAL OPERATION
If the gate has to be operated manually due to a power failure
or malfunction of the automation, use the release device as
follows.
- Open the door in the casing using the triangular key provided
(see fig. 24).
- Operate the relase lever shown in fig. 25 (pos. MANUAL).
- A safety microswitch in the release system prevents the
automation from being activated by accidental commands
(7, fig. 2).
- Close the door and open or close the gate manually.
8.
RETURN TO NORMAL OPERATION
- Open the door in the casing using the triangular key provided
(see fig. 24).
- Move back the lever shown in fig. 25 up to the mechanical
stop (pos. AUTOMATIC).
- Close the door.
9.
MAINTENANCE
When performing maintenance always check that the anti-
crushing clutch is correctly regulated and that the safety
devices operate correctly.
10. REPAIRS
For repairs contact an authorised FAAC Repair Centre.
Give the customer the User's Guide.Explain correct use and
operation of the gear motor and draw attention to the potential
danger zones of the automation.
