29
28
844 ER 3PH
20
532366 - Rev.A
7
3
3
5
4
3
3
5
1
2
4
Tr
ansla
tion of the orig
inal instruc
tions
ENGLISH
7. START-UP
RISKS
PERSONAL PROTECTIVE EQUIPMENT
!
During operation there is a risk of fingers and hands being trapped between
the rack, pinion and casing.
Under certain conditions, as a result of prolonged continuous operation,
the body of the gearmotor can reach high temperatures. Avoid touching it.
7.1 ELECTRICAL CONNECTIONS
Refer to the specific instructions for the electronic board.
7.2 EARTHING THE GEARMOTOR
F
Carry out the work with the power supply disconnected.
Connect the earth of the system to the free faston connector on
board E844 3PH.
7.3 INSTALLING THE CABLE GLANDS
1. Position elements
1
and
2
(with the slot of each inserted in the pin).
2. Remove the sheath in order to separate the individual wires. Ar-
range the wires on the rubber strip.
3. Tighten the two elements and fasten them using the screws
3
and the nuts
4
.
4. Fasten to the surface using the screws
5
.
Connecting the earth to the gearmotor.
Installing the cable glands.
Screw seat
Slot
Pin
Pin
Summary of Contents for 844 ER 3PH
Page 1: ...844 ER 3PH Translation of the original instructions...
Page 29: ......
Page 30: ......
Page 31: ......