ENGLISH
12
BASIC PROGRAMMING
Display
Function
Default
FUNCTION LOGICS:
= Automatic
= Semi-automatic
CLOSING SLOW START:
Settable from
to
sec.
PAUSE TIME:
This operates only if the automatic logic was selected. Can be adjusted from
to
sec.
in one second steps.
Next, the viewing changes in minutes and tenths of a second (separated by a dot) and time
is adjusted in 10 second steps, up to the maximum value of
minutes.
E.g.: if the display shows
, the pause time will be 2 min and 50 sec.
ELECTRONIC CLUTCH:
Limits the operator's maximum thrust.
Settable from (minimum force)
to
(maximum force)
To exit programming and return to display of inputs status
ADVANCED PROGRAMMING
Display
Function
Default
COURTESY LIGHT:
For setting lighted time of the courtesy light.
Can be adjusted from
to
sec. in one second steps.
Next, the viewing changes in minutes and tenths of a second (separated by a dot) and time
is adjusted in 10 second steps, up to the maximum value of
minutes.
E.g.: if the display shows
, the lighted time will be 2 min and 50 sec.
MAXIMUM STARTING TORQUE:
= Active
= Disabled
FAIL SAFE (safety devices operational check):
= Active
= Disabled
7. PROGRAMMING
To program the operation of the automated system, you must access the "PROGRAMMING" mode.
Programming is in two parts: BASIC and ADVANCED.
7.1. BASIC PROGRAMMING
To access BASIC PROGRAMMING, use push-button
F
:
• if you press it (and hold it down), the display shows the name of the first function.
• if you release the push-button, the display shows the value of the function, which can be changed with keys
+
and
-
.
• if you press
F
again (and hold it down), the display shows the name of the next function, etc.
• when you reach the last function, press the
F
push-button to exit programming, and the display resumes showing the
inputs status.
The following table indicates the sequence of functions accessible in BASIC PROGRAMMING:
7.2. ADVANCED PROGRAMMING
To access ADVANCED PROGRAMMING, press push-button
F
and, while holding it down, press push-button
+
:
• if you release the
+
push-button, the display shows the name of the first function.
• if you also release the
F
push-button, the display shows the value of the function, which can be changed with keys
+
and
-
.
• if you press the
F
push-button (and hold it down), the display shows the name of the next function; if you release it, the
value is shown and can be changed with keys
+
and
-
.
• when you reach the last function, press the
F
push-button to exit programming, and the display resumes showing the
inputs status.
The following table indicates the sequence of functions accessible in ADVANCED PROGRAMMING:
Summary of Contents for 550 ITT
Page 11: ......
