26 |
P a g e
How to Achieve & Maintain IP55 Rating
The IP55 rating attached to this unit is only achieved if the below steps have been
followed. This is to prevent any unwanted water and/or bug ingress that can cause
various issues with functionality and will void warranty if not followed.
Step 1
–
Mount to location
Step 2
–
Seal unit
Step 3
–
Close unit
Ensure the security locking screws are
adequately tightened to ensure a correct
seal.
53-69 lb/in (6.0-7.8 Nm)
Seal all mounting or cable cut outs by using
sealant such as silicone.
Ensure that any products being used are safe to use as
some products can cause damage to the unit and/or the
mounting location.
If surface mounting seal around the back box
especially when used on an uneven surface.
Use the pre-drilled mounting holes and
cable cut outs to connect the intercom to
the mounting option choosen.
