manualshive.com logo in svg

F5 Viprion, Platform Manual

Share
Download
F5 Viprion Platform Manual Download Page 81

Platform Specifications

Platform Guide: VIPRION

®

9 - 5

PB200 blade specifications

The following specifications apply to the PB200 blade only.

WARNING

This platform supports only optics modules provided by F5 Networks.

Important

Specifications are subject to change without notification.

Item

Specification

Dimensions

Proprietary to fit F5 Networks chassis

Weight

14.5 lbs (6.58 kg)

Processors

Two Quad-Core AMD Opteron™ processors

Network Interfaces

1x10/100/1000Mbps Ethernet management port

4x1000Mbps Ethernet copper ports

8x1000Mbps/10Gps Ethernet SFP+ fiber ports

• 10GBASE-SR - 850nm (LC Connector, two modules 

included)

• 10GBASE-LR/LW - 1310nm (LC Connector, optional)
• 1000BASE-SX - 850nm (LC Connector, optional
• 1000BASE-LX - 1310nm (LC Connector, optional)

Hard Drive Capacity

160 Gigabyte ATA hard drive

8 Gigabyte Compact Flash

RAM

16 GB

Typical power draw 
(under heavy load)

325W

Maximum power draw

350W

Typical heat generated

1100 BTU/hour

Maximum heat 
generated

1200 BTU/hour

Table 9.6  

The PB200 blade specifications

Summary of Contents for Viprion


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands