Installing the Slide-Rail Mounting Kit Hardware
ARX-1500/2500 Slide Rail FRU
1 - 5
6. Install the rear-rail mount brackets (the long ones) to the
slide-cabinet members, as shown below, using the wing nuts
provided. Before tightening the wing nuts, ensure the end-to-end
measurement of the slide rails of the mounting brackets matches the
rail-to-rail measurement of the equipment rack.
Ensure the three-hole side of the bracket is facing out
(as shown
in both of the following figures.)
7. Install the slide rails on the inside rail of the equipment rack. Insert
the thumb screws provided in the top and bottom holes by screwing
them through the cabinet rails and into the slide-bracket threaded
inserts. (Leave the middle hole open.)
8. Repeat Step 7 to secure the slide rail to the rear equipment rack rail.
Summary of Contents for ARX-1500
Page 1: ...ARX 1500 2500 Slide Rail FRU PUB 0243 00 ...
Page 2: ......
