background image

iv

Canadian Regulatory Compliance

This Class A digital apparatus complies with Canadian ICES-003.

Standards Compliance

This product conforms to the IEC, European Union, ANSI/UL and Canadian CSA standards applicable to 
Information Technology products at the time of manufacture.

Acknowledgments

This product includes software from several third-party vendors. Each vendor is listed below with the 
applicable copyright.

Copyright (c) 1990, 1993, 1994, 1995 The Regents of the University of California.  All rights reserved.

Copyright 2000 by the Massachusetts Institute of Technology. All Rights Reserved.

Export of this software from the United States of America may require a specific license from the United 
States Government. It is the responsibility of any person or organization contemplating export to obtain 
such a license before exporting.

Copyright 1993 by OpenVision Technologies, Inc.

Copyright (C) 1998 by the FundsXpress, INC.

All rights reserved.

Export of this software from the United States of America may require a specific license from the United 
States Government.  It is the responsibility of any person or organization contemplating export to obtain 
such a license before exporting.

Copyright (c) 1995-2001 International Business Machines Corporation and others

All rights reserved.

Copyright (c) 1990-2003 Sleepycat Software.  All rights reserved.

Copyright (c) 1995, 1996 The President and Fellows of Harvard University.  All rights reserved.

Copyright (c) 1998-2004 The OpenSSL Project.  All rights reserved.

Unless otherwise noted, the companies, organizations, products, domain names, email addresses, logos, 
people, places, and events depicted in examples herein are fictitious.  No association with any real 
company, organization, product, domain name, email address, logo, person, place, or event is intended or 
should be inferred.

Revision History

June 2011 — First printing for Release 6.0.0.

July 2011 — Second printing, Rev B, for Release 6.0.0.

September 2011 — Third printing for Release 6.1.0.

Summary of Contents for ARX-1500













Reviews: