F-One SWING, User Manual

Page: 10 / 13

PACK UP YOUR WING
HARNESS LINE ATTACHMENT
LEAVE YOUR WING ON THE GROUND
YOU CAN LEAVE YOUR SWING ON THE GROUND IN TWO DIFFERENT MANNERS:
FRANÇAIS
ENGLISH
18 19
To open or close the valve, start with opening the cap
by turning it over 1/4 of a turn.
The valve works simply by pressing on the red central
push button. If the button is pushed in, the valve is
open. If the button sticks out, the valve is closed.
Always take care to close the cap back on and lock it
by turning it over 1/4 of a turn.
TO ENSURE THE PROPER OPERATION OF THE
VALVE IN THE LONG TERM
• Avoid letting sand getting into the valve
• Make sure the inflation connector does not contain
sand when plugging it into the valve
• When not in use, make sure the protective cover is
fitted back on.
• Make regular checks, unscrew the valve to remove
it and rince it with clear water.
—1—
Deflate the wing with the wind blowing
from your back.
—2—
Roll up the 2 sides and fold it in 2.
—1—
Attached to something with the wrist leash
(a tree, a barrier, a board etc )
—2—
On the backside with sand on the profile.
—1—
Hold your harness line from the setting knots
side, insert it in the attachement strap placed in
between the two back handles.
—2—
Make a lark’s head knot
—3—
Hold the other side of the harness line and
insert it in the lark’s head knot
—4—
Slip the harness line into the lark’s head knot
and pick a setting knot according to your
needs. Tie the knot.
—5—
Hold the other side of the harness line and
make an other lark’s head knot.
—6—
Tie it around the attachement knot behind the
front handle.