5
4.
RECHARGEABLE BATTERY
The battery
of your e-bike can be located under the rear rack or in the frame of the bike, depending on the
model you choose. The battery of each bicycle is replaceable and rechargeable.
4.1
Removing the battery from the e-bike
Battery built into the frame tube
To remove the battery from the e-bike frame:
1.
Put the key in the lock and unlock it
–
you should hear a click.
2.
You can then remove the battery by pulling it up.
3.
To reinstall the battery, place the battery back, attach the cover, and lock it with the key.
Battery located on the rear rack or horizontally behind the saddle bar
To remove the battery from the e-bike frame:
1. insert the key in the lock and turn left.
2. Pull the battery out of the rear rack
3. To reinstall the battery, place the battery back on the rear rack until it clicks evenly. Then turn the key to the
right and lock the battery. Remove the key.
For safety reasons, the battery is securely attached to the roof rack and requires more force to
be pulled out.
ALWAYS turn off the e-bicycle system using the handlebar display before removing the battery.
4.2 Charging the battery
Make sure the charger is compatible with the local mains.
Use only the charger supplied with your e-bike. Using non-genuine chargers will void the
warranty. Non-genuine chargers can cause serious injuries to the user, such as burns and electric
shocks, as well as damage to the e-bike and battery.
4.3 Charging time
Charge the battery before use. The first three times you recharge the battery, please perform a full battery
charge cycle. Keep the charger plugged in and connected for 24 hours. This will increase battery life.
After the first three full 24-hour battery charging cycles, approximately 5 to 9 hours will be required to fully
charge the battery. Avoid charging the battery for longer than necessary.
There are two ways to charge your battery:
Recharging battery while still mounted on the e-bike
When your bike parking space is provided with a 220 V electrical outlet, you can leave your battery on the
bike while it charges. Leave the battery in the rear rack or in the frame and simply connect it to the charger
by lifting the rubber seal that serves as a protector.
