16
7.
TECHNICAL SPECIFICATIONS
7.1 Wheels
Mounting using a quick-release mechanism
Release the quick-release lever, slide it into the wheel axle, tighten the adjusting cap located on the opposite
end of the axle, and loosen it by one turn. The safety washers must always rest on the fork blades and the
quick-release system. Mount the wheel, center it, and lock the lever firmly by hand. The lever is firmly fixed
when
it
reaches
a
position
parallel
to
the
fork.
HINT:
You should feel strong resistance when you press the quick release lever: this means that the wheel is
mounted correctly. Press the front wheel by hand to make sure it is firmly mounted.
1. Adjusting cap
2. Quick release lever
3. Lever secured position
4. Safety washer
5. Lever released position
6. Fork jaws
7. Nut
8. Hub
9. Safety washer
Mounting with no quick-release mechanism
Mount the wheel, center it and tighten the nuts on each side of the fork. The safety washers must always
rest on the fork blades and the hub nuts. Tightening torque: 17 Nm.
Before use, make sure that your wheels are properly secured to the frame and fork.
7.2 Pedals
Your pedals are marked with the letters “R” and “L”. When fitting, turn the right pedal, marked “R”, on the
right side of the crank (also marked “R”) on the crank plate
face. Turn tight by turning clockwise toward the
front wheel. Turn the left pedal marked “L” to the left crank “L” to the front wheel in a counterclockwise
direction. Tighten both pedals well!
