F.F. Group RH 24/720 PRO, Original Instructions Manual

Page: 9 / 48

English | 9
www.ffgroup-tools.com
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused
by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly main -
tained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for opera -
tions different from those intended could result
in a hazardous situation.
SERVICE
Have your power tool serviced by a qualified re -
pair person using only identical replacement
parts. This will ensure that the safety of the pow-
er tool is maintained.
FOR YOUR SAFETY
Connect the mains plug only when the tool is
switched off. After using, pull the mains plug.
Always direct the cable to the rear away from the
machine.
Do not carry the machine by the cable.
When working with the machine, always hold it firm -
ly with both hands and provide for a secure stance.
During pauses in the work, when not in use or
during work on the machine itself (e.g., changing
of the working tools, repairs, cleaning, adjust -
ment), pull the mains plug.
Persons under 16 year of age are not permitted to
operate this machine.
Keep the tool accessories out of the reach of chil -
dren. Only use original accessories
PRODUCT SPECIFICATIONS
INTENDED USE
The machine is intended for hammer drilling in
concrete, brick and stone. It is likewise suitable for
drilling without impact in wood, metal, ceramic and
plastic.
TECHNICAL DATA
Article Number 41 379
Model RH 24/720 PRO
Chuck type SDS Plus
Rated power input W 720
Voltage V/Hz 230-240/50
No load speed min
-1
0-1.300
Impact rate min
-1
0-4.500
Impact energy J 2,6
TECHNICAL DATA
Article Number 41 379
Model RH 24/720 PRO
Max. drilling diameter:
Concrete mm 24
Steel mm 13
Wood mm 30
Weight (without acces-
sories) approx.
kg 2,7
Sound emission values determined according to
EN 60745-1, EN 60745-2-6
Typically the A-weighted noise levels of the product are:
Sound pressure level
(LpA)
dB(A) 91
Sound power level (LwA) dB(A) 102
Uncertainty (K) dB 3,0
Vibration total values ah (triax vector sum)
and uncertainty K determined according to EN
60745-1, EN 60745-2-6
Hammer drilling in concrete:
Vibration level (a
h, HD
) m/s
2
3,2
Uncertainty (K) m/s
2
1,5
Chiselling:
Vibration level (a
h, HD
) m/s
2
9,9
Uncertainty (K) m/s 2 1,5
IDENTIFICATION (FIG. 1)
1. SDS - plus chuck
2. Tool holder (SDS - plus)
3. Dust protection cap
4. Locking sleeve
5. Depth stop
6. Auxiliary handle
7. Operational mode selection switch
8. Forward/reverse function lever
9. Lock-on button
10. On/Off switch
NOTE
Not all the accessories illustrated or described in-
cluded in standard delivery.
OPERATION
Be careful of hidden electrical lines or gas and wa-
ter pipes. Check the working area, e.g. with a met -
al detector. Always use the correct supply voltage!
The voltage of the power source must agree with
the value given on the nameplate of the machine.
RH 24/720 PRO