English | 13
ELM 32/1000 EASY
www.ffgroup-tools.com
assembly with both hands and tilt the handle
downward to slightly raise the front of the lawn
mower
(Q)
. This will reduce the risk of lawn dam-
age during start-up.
3. Press and hold the safety button
(m1)
of the
switch assembly while pulling the on/off switch
lever
(2)
towards you. Once the machine powers
on, release the safety lock button
(m1) (M)
.
4. Let the motor get up to speed, gently lowering
the lawn mower down into the cutting position
and start mowing
(R)
.
STOPPING THE MOTOR
To stop the mower, release the ON/OFF switch le-
ver and it automatically returns to its OFF position.
GRASS COLLECTION BAG VOLUME INDICATOR (O)
1. If the grass collection bag is empty or is not com-
pletely full with grass, the grass indicator flap
will remain open
(o1)
(due to the flow of air) or
will flutter open and close as the grass accumu-
lates in the bag.
2. When the grass bag reaches its maximum capac-
ity, the grass indicator flap will remain closed
(o2)
(due to the restricted air flow). This signals
that it is time to empty the bag.
MOWING TIPS (P)
For best results cut your lawn in alternative direc-
tions switching direction each time you cut. Cut
your lawn at an equal and same height. Slightly
overlap your cutting lines.
MAINTENANCE
WARNING!
Before cleaning, repairing, or in-
specting the lawn mower, disconnect the
power supply to the unit and verify that all
moving parts have come to a complete stop.
GENERAL
f
Always keep the lawn mower clean and free of grass,
dirt, or other debris.
f
Keep the handles dry, clean, and free of oil and
grease.
f
After each cutting session, remove accumulated
grass clippings and debris using either a dry cloth
or hand brush. You may also clean the equipment
with a damp cloth. Do not use cleaning agents or
harsh solvents as they may damage the equipment’s
plastic components. Make sure that no water pen-
etrates the equipment’s interior as intake of water
can destroy the switch/plug mechanism and the
electric motor.
f
Do not clean the lawn mower with running water,
particularly with high-pressure water.
f
Check all nuts, bolts, and screws for proper tightness
before each use.
f
Frequently inspect the grass collection bag for signs
of wear and replace immediately with a genuine part
if damage is found.
f
Replace excessively worn or damaged parts imme-
diately.
BLADE MAINTENANCE
IMPORTANT!
The mower blade is sharp and
can cause severe personal injury if handled in-
correctly. Wrap the blade or wear protective
gloves, and use extra caution when handling.
The steel blade is designed to provide a fine cut in
long or tough grass. Deterioration in the quality
of cut indicates blade wear or damage.
WARNING!
An excessively vibrating lawn
mower indicates that the blade is not prop-
erly balanced or has become deformed from
striking an object. In this case, the blade
must be repaired or replaced. Please follow
the proper maintenance procedures for
blade care or call the service center.
BLADE REPLACEMENT (N)
WARNING!
Wear heavy duty gloves when
handling the blade.
IMPORTANT!
Only use original replacement
parts specified for this lawn mower.
1. Disconnect the electrical supply to the lawn
mower.
2. Turn the lawn mower on its side to expose the
underside of the blade housing.
3. Wear heavy-duty gloves, or use a cloth to grip
the blade.
4. To remove the blade bolt
(n1)
, hold the blade
firmly by one hand, and use a spanner wrench
(n2)
to loosen the blade bolt by turning it coun-
terclockwise.
5. Fit the new blade, the washer and the bolt back
on following the same steps in reverse order.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste. Machine, accessories and pack-
aging should be sorted for environment -
friendly recycling. The plastic components
are labeled for categorized recycling.
GUARANTEE
This product is warranted in accordance with the le-
gal/country specific regulations, effective from the
date of purchase by the first user. Damage attribut-
able to normal wear and tear, overload or improper
handling will be excluded from the guarantee. In
case of a claim, please send the machine, completely
assembled, to your dealer or the service Centre for
electric power tools.
Summary of Contents for ELM 32
