17
Make an output public
This command is used to make an output public, which means it can be controlled by anyone
and not just a programmed user. This could be used for a gate for example.
To set the output feature on:
Command:
Make
OUTPUT NAME public
The system responds with:
The output OutputName
is now a public output
To set the output feature off:
Command:
Make
OUTPUT NAME private
The system responds with:
The output OutputName
is now a private output
Turn Output response On / Off
This command is used to turn the output response text On or Off.
If the output response is turned off then a response text is not sent when outputs are turned
on or off System default is ON (send response).
To turn the feature on:
Command:
Turn respond on
The system responds with:
This feature has been enabled, response text will be sent
To turn the feature off:
Command:
Turn respond off
The system responds with:
This feature has been disabled, response text will not be sent
Save Output Status
This command is used to define if the output state is saved to memory and restored to it state
after a power recycle. E.g. if an output was On when the power was turned off then when the
power is restored the output will turn back on. Note this does not apply if an output was turned
on for a specified time. System default is not saved.
Command:
Make OUTPUT NAME save
The system responds with:
The output condition will be saved and restored if the power is reset
To turn the feature off:
Command:
Make OUTPUT NAME nonsave
The system responds with:
The output condition will not saved
Note: If you want this for both outputs then the command needs to be sent for both outputs
Link Outputs
(only available in ver 1.2 or later)
This command is used to link outputs together.
To link outputs:
Command:
Link outputs ? ? ?
e.g. Link outputs 1 & 4
:
Command:
Link outputs 1 4
The system responds with:
The outputs have been linked
To clear links:
Command:
Clear linked outputs
The system responds with:
All linked outputs have been cleared
Ezy Switch SMS-IRR-4 Installation & Operation
