Normal use, age, and wear on vehicle components can affect the safe operation and reliability of the vehicle. The rec
-
ommended Inspection and maintenance procedures are crucial for safety, performance, reliability and maximum lon
-
gevity of your vehicle.
A damaged vehicle, or a vehicle that is not functioning properly is dangerous and must not be operated until repairs
are made.
NOTICE: Read the following operational warnings before driving the vehicle:
Before exiting the vehicle, turn the key switch to the OFF position and remove the key
from the vehicle to prevent unauthorized use.
Drive the vehicle at appropriate speeds for the terrain and conditions. Be aware of any
environmental conditions that change the terrain and your ability to control the vehicle.
Do not drive on excessively steep hills. Evaluate the terrain before descending a hill.
Drive slowly and deliberately. Use the brake to limit speed and maintain control. Sudden
braking or turning can cause a loss of vehicle control. Drive straight down the hill; do
not drive across the hill.
Operate in approved areas.
Keep both feet, legs, hands and arms inside the vehicle at all times.
Avoid driving on terrain that is too rough for the capabilities of the vehicle and your driv
-
ing skills.
Before driving in the reverse direction, make sure the area behind the vehicle is clear.
Accelerate slowly and avoid making sharp turns.
Make sure the direction selector is in the correct position before pressing the accelera
-
tor pedal.
Decrease speed before and during turns.
Bring the vehicle to a complete stop before moving the direction selector.
See
on page 45 for the vehicle load and seat capacity.
NOTICE: Read the following maintenance information and warnings before servicing or repairing the vehicle:
Follow the procedures and comply with the safety information in this manual while performing vehicle service or main
-
tenance.
Use the tools shown in the tool list and wear the specified safety equipment when performing vehicle service or main
-
tenance.
Remove all jewelry before servicing the vehicle.
Do not allow loose clothing or hair to contact the moving parts.
Do not touch hot objects.
The drive wheels must be lifted and supported on jack stands before performing any ser
-
vice to the powertrain while
the motor is in operation.
When servicing the vehicle, always wear eye protection. Be careful when
working around batteries, using solvents, or compressed air.
Use insulated wrenches to decrease the risk of a short-circuit if a wrench
contacts the battery terminals. A short-circuit in a battery can cause an
explosion.
To prevent the risk of battery explosion, keep all flammable materials, open flames, or
sparks away from the batteries.
Hydrogen gas is produced during the charging cycle. Charge the batteries only well ven
-
tilated areas.
Maintain constant awareness that some components are heavy, spring loaded, corro
-
sive, explosive, can cause high amperage, or get extremely hot. Keep your hands, face,
feet and body away from any area that can expose them to injury if an unexpected situa
-
tion occurs.
Summary of Contents for Valor
