background image

S

AFETY

11

SAFETY

For questions about the vehicle or the material in this manual, see the contact information in 

MANUFACTURER 

INFORMATION 

on page 1 or the back of this publication.

MAXIMUM WEIGHT CAPACITY

Exceeding the weight capacities can cause the loss of vehicle control and possible 

injury or death.    

 
Do not exceed the maximum vehicle weight capacity (includes weight of operator, passenger, cargo, and accesso

-

ries).

TIRE PRESSURE

Improper tire pressure or uneven tire pressure can cause the loss of vehicle control and 

possible injury or death.

Maintaining the correct tire inflation pressure is essential for safe vehicle operation. The inflation pressure can vary 

within the recommended range to suit the condition of the terrain.

OPERATOR SAFETY

Safe and responsible

 

use of this vehicle is necessary to prevent dangerous conditions for the operator, passengers 

and other people in the area of operation. This section of the manual provides information on the safe operation of the 

vehicle. Make sure to read, understand and comply with all of this information to decrease the risk of personal injury or 

death.

Serious injury or death can occur if you do not follow the instructions and procedures 

shown in this owner’s manual.

• Read this entire manual and all product labels carefully. Follow the safety information and operating procedures 

described.

• Operate your vehicle responsibly to prevent dangerous conditions for the operator, passengers and other people in 

the area of operation

• Operate the vehicle responsibly and keep the vehicle in safe condition of operation.

• A damaged vehicle or a vehicle that is not functioning properly is dangerous and must not be operated until repairs 

are made.

• Do not carry a passenger until you have a minimum of two hours driving experience on this vehicle.

• Keep feet, legs, hands, and arms inside the vehicle at all times.

• The driver must keep both hands on the steering wheel and both feet on the floor or pedals.

• Inspect the vehicle before each use to make sure it is in safe operating condition. Perform the pre-ride inspection 

described in this manual. See page 19.

• Always have the vehicle checked by an authorized dealer if it is involved in an accident.

• Always put the direction selector in forward (F) and engage the parking brake before you exit the vehicle.

• Remove the key when the vehicle is not in use to prevent accidental starting, unauthorized use by someone below 

the age of 16, or someone without a driver’s license and proper training.

• Drive the vehicle at appropriate speeds for the terrain and conditions. Be aware of environmental conditions that 

change the terrain and your ability to control the vehicle.

• Do not drive on excessively steep hills. Evaluate the terrain before descending a hill. Drive slowly and deliberately. 

Use the brake to limit speed and maintain control. Sudden braking or turning can cause the loss of vehicle control. 

Drive straight down the hill. Do not drive across the hill.

Maximum Vehicle Weight Capacity

800 lb (363 kg)

TIRE PRESSURE RANGE

TERRAIN CONDITIONS

RECOMMENDATION

18 - 22 psi (124 - 152 kPa)

Hard surfaces or pavement

Inflate to higher pressure within the range; never exceed 

maximum pressure indicated.

Soft terrain or turf

Inflate to lower pressure within the range to reduce 

potential damage to the terrain or turf.

Summary of Contents for Valor

























































Reviews: