Ezgo Valor, Owner'S Manual

Page: 36 / 56

34
M
AINTENANCE
Brake Light
Remove the two phillips head screws securing lens
and pull lens out of housing to access the brake light
bulb. Remove the light bulb and install a new bulb,
making sure bulb makes good contact with socket.
Replace the lens and reinstall the phillips head
screws.
FUSE REPLACEMENT
NOTICE: Have the vehicle inspected by your dealer if
fuses continue to blow after they have been
replaced.
1. Lift the seat bottom to access the PDM.
2. Open the PDM to access the fuses.
3. Remove the old fuse and replace with a new fuse of the
same type and size.
4. Fuses are available from a local Distributor, an autho -
rized Branch or the Service Parts Department.
CONTROLLER SYSTEM TEST
At monthly intervals, test the controller by allowing the vehicle
to roll down an incline with the accelerator pedal released.
Braking force should be felt at approximately 2 mph (3 kph)
indicating that the system is functioning. If vehicle speed con -
tinues to rise, apply the brake and have vehicle inspected by
a trained mechanic.
Rear Fender
Lens
Bulb
15A Mini Fuse