How to set up EZCast Beam V3 projector
Preparation
1. Plug the power to the projector, and the power button will light up.
2. Insert the wireless adapter into the wireless kit port of the projector.
3. To turn on projector, hold the power button of the projector for 3
seconds till you hear the "beep” sound and the light will turn blue.
4. Adjust focus ring until the projection image is clear and focused.
(Do not block)
Project forward
Project upward
Projector stand
Ventilation
Holders
(Do not block)
Ventilation
(Do not block)
Ventilation
Wireless
Adapter
HDMI
DC
Projector stand and holders
1. Normal mode: When projecting forward, adjust elevation angel by
loosening the projector stand under the projector. When projecting
upward, use the holders to avoid blockage of ventilation.
2. Portrait mode: Equip the projector holders at the bottom to make sure
the ventilation works well.
(Normal mode)
(Normal mode)
(Portrait mode)
OK
