background image

7

Daily Routine Maintenance

• 

Clean the EZ1000 after each use with a mixed, 
nonabrasive type of detergent according to your 
detergent supplier instructions. 

NOTE:

 Do not 

use solvent-based cleaning liquids, which can 
damage or stain the surfaces.

• 

Use a sponge or cloth and remove any soap or 
lime deposits and feces promptly to avoid spots/
stains. Rinse thoroughly with fresh water and 
wipe with cloth. 

NOTE: If feces or other 

matter adheres to columns, immediately 
clean the columns before raising and 
lowering the EZ1000.

• 

It is recommended that the battery packs are 
charged daily or whenever the EZ1000 is not in 
use. Batteries cannot be overcharged.

Weekly Maintenance
Visually inspect the EZ1000 interior to make sure 
there are no nicks or cracks, which may scratch the 
resident.

Monthly Maintenance

• 

Check that all screws and fastenings are tight. 
It’s important that all screws and fastenings are 
checked and tightened if needed, including 
those not easily visible. Inspection of all 
fasteners and screws are also expected during the 
monthly maintenance.

• 

Armrests should be inspected to ensure they are 
in good condition and that all fasteners are in 
place and functioning properly.

• 

Casters should be inspected to ensure they are 
clean and that the locks and brakes are fully 
functioning.

• 

Tilting mechanism should be examined to 
ensure that it is functioning properly.

• 

Check the raising and tilting system to ensure its 
smooth operation throughout entire lift and tilt 
range.

Annual Maintenance
It is recommended that a competent maintenance 
technician perform a full inspection of the EZ1000 
for check up.

Battery Pack
Deposit in accordance to local regulations.

Cleaning the EZ1000

NOTE: The user/operator is responsible for 
selecting the detergent and additives. Please 
read the detergent supplier’s instruction 
manual and find out whether the product is 
suitable. Do not use solvent-based cleaning 
liquids, which can damage or stain the PUR 
and plastic surfaces (see Routine Maintenance 
below).

Clean the EZ1000 after each use with a mixed, 
nonabrasive type of detergent according to your 
detergent supplier instructions. Remove the 
optional bedpan and clean separately.

• 

Use a sponge or cloth and promptly remove any 
soap or lime deposits and feces to avoid spots/
stains. Rinse thoroughly with fresh water. Wipe 
with cloth.

• 

Safety belt may be machine washed and dried. 

NOTE:

 Wipe underneath the EZ1000 to 

prevent dripping on the floor.

NOTE: If the lifting columns are exposed to 
feces or other tough dirt during operation, 
immediately clean the columns before raising 
and lowering the EZ1000.

Routine Maintenance

The recommended frequency of these routine 
maintenance procedures will depend on how 
often the equipment is used. It is good practice 
to establish these procedures and then adjust 
the frequency as your conditions indicate. EZ 
Way recommends a schedule is kept on file with 
signatures of the individual(s) conducting the 
inspections should questions arise at a later date.

The EZ1000 should immediately be taken out 
of operation if defects or irregularities are noted. 
Prompt service is required.

Summary of Contents for EZ1000









Reviews: