Always think safety first when working with the Jibs and Cranes
Below are some fundamental rules to abide by when operating the Skinny Jib.
•
Understand and follow the set up instructions provided in this user manual. Allow yourself
sufficient time to learn the process. Practice the set up before using the Skinny Jib for the
first time. Include any personnel that will be using the Skinny Jib and make sure that they
understand how to use it safely.
•
Always mount the Skinny Jib to a sufficient support and wheel system. We recommend a
professional video tripod or Combo Stand (grip equipment). When using the Skinny Jib Ex-
tension Kit, a sturdy tripod support is required. We suggest the EZ FX JibPod 2.0.
•
Understand that the Skinny Jib works like a see saw, using weights on one end to counter
balance the weight of the camera on the other. With that in mind, understand that adding or
removing weight from either side creates an imbalance. Follow the following procedure to
avoid unintentional raising or lowering of the Jib.
PROCEDURE for REMOVING CAMERA: Always secure the camera end down to a solid
surface before you remove any counter weights. We recommend a C Stand support with the
provided stead rest yoke. Inversely, don’t remove the camera until you have secured it
and removed the counter weights first.
•
Be aware of pinch points on the Skinny Jib and avoid placing items such as cables or body
parts in an area where moving parts can cause damage or harm someone.
•
Do not move (roll) the support system (with Skinny Jib Mounted) from one position to another
while the camera and counter weights are attached. Always remove the camera and only
keep sufficient counterweights needed to balance the crane before moving.
Also, never move the system alone. Have spotters on both ends of the Jib.
When rolling the support system. Never push from a high spot. To avoid tipping,
always pull (preferably) or push from a low spot near the wheel base.
•
Be aware of your surroundings. When choosing a location for placement, consider obstruc-
tions & wiring & environmental situations that will effect safety and your performance.
•
Never swing or position the Jib in a manner that would risk contact with people or objects.
Know your boundaries before you begin.
•
Weather in a public or private environment, always respect other peoples space and practice
professional etiquette.
•
Be aware that understanding the disassembly of the Skinny is just as important as under-
standing the assembly process. Remove the camera safely as described above and always
pack the components away as instructed in this manual so that you have all the parts you
need to operate efficiently and safely.
SAFETY RULES
