Cap Tubing Fittings: Insert and Release
II N
N
O
O U
U T
T
SLOW
1 2
FAST
IN
OUT
Top View
Side View
The EZ-FLO system uses push connect fittings to
connect the clear and black 1/4” tubing to the cap
To Insert
1
Insert the end of the tubing into the
appropriate side (Clear to Green /
Black to Blue) by pressing into the hole.
Press gently until the tubing stops.
2
Gently tug the tubing
to insure it is locked into place.
Press tubing
To Remove
1
Shut off pressure to the system using the back
flow valve or included gray shut off valves.
2
Apply gentle pressure to the Green or Blue
collet with your fingers or provided washer.
Press Collet
Collet
3
While holding pressure, gently pull the
tubing away from the fitting to release.
Pull tubing
Hold pressure
,
Make sure to direct the fitting away
from your face and body. A small
amount of residual pressure may be
in the tank and cause a momentary
release of fluid.
Note:
2
Page
3
www
.ezflo.com.a
u
TM
© 2020, EZ-FLO Fertilizing Systems
