27
Skip
(default)
Copy data from source to target except data stored in HPA and keep the target HPA setting
during Copy.
Clear Target HPA without Copy
Copy data from source to target and remove the target HPA setting during Copy
Set Target HPA without Copy
Copy data from source to target and set the target HDD the same HPA setting as the source
HDD during Copy.
Copy
Copy data from source to target including data stored in HPA.
5.6 DCO Set
This option allows you to enable or disable set DCO. If option
Disable
is selected here, the
DCO set from source will not be copied during copy process. If
Enable
is selected, the set
DCO will be copied to all target HDDs.
Disable
set DCO is the default setting.
Use ▲or ▼ to select
5.7 Allow Reader Bad Sector
This option allows you to Stop or Skip the Copy Process when source disk has bad sector.
Stop
is the default setting.
5.8 Erase Master
This option allows you to set if the master disk can be erased or not.
Disable
is the default
setting.
[Setup]
6. DCO set
[
DCO Set
]
Disable
OK
[Setup]
7. Allow Reader Bad Sector
[
Allow Reader Bad Sector
]
Stop
OK
