11
III. Operation Overview
The duplicator will start to execute a task after the source and target devices have been
inserted and the OK button is pressed. The task will begin and end at the same time for all
target devices. Any other target device plugged in during the process of a task will not be
executed with the task.
a.
Insert source media into the source channel and blank media into the target channels
properly. The LCD display will show no source disk when source media is not plugged
in yet, and show the number of target media inserted when source media plugged in.
b. The green LED will be on if the target device is plugged in properly.
c.
Select the task from menu, and press
OK
button to execute it.
d. During the execution process, the status of each target device can be checked by
using the
▲
and
▼
buttons.
e. After the task is done, LCD display will show the number of successful and failed
target(s), and execution time.
HD Pal Series provides 3 operation modes to be selected by users at
5.1 Operation Mode
.
The selected operation mode will be shown on the LCD display.
1. Disk to Disk
Performs a sector by sector copy of the source disk to target disks to produce exact duplicates
of the source disc. Source disk sector 1 is copied to destination disk sector 1, then sector 2 is
copied to sector 2, sector 3 to sector 3, and so on. It can do up to 3 targets duplications.
