24
Press
▲▼ to select option
4.8 Print Last Task Label
(HD Pal Pro only)
If the label quality is not good enough of the last task, this option allows user to print the label(s)
of the last task again.
4.9 System Info.
This option displays general information of the duplicator, including controller model,
system memory size, firmware version, number of targets and ID Number
.
4.10 System Update
This option allows user to update the firmware of duplicator when necessary. Please obtain
the proper firmware file from manufacturer, and save the unzipped file under home folder on
the HDD (
The file system of should be FAT32
). Insert the HDD containing the firmware
into the source port of duplicator and press OK. It will update the system, reboot the
duplicator automatically after update, active and operate under the new firmware.
Please
do not reboot the duplicator manually.
Looking for firmware
5. Setup
5.1
Operation Mode
There are 3 operation modes can be selected.
Disk to Disk, Disk to File
and
File to Disk.
The details please refer to
Chapter 2.
The default mode is
Disk to Disk
Complete!
Wait…
[Utility]
10. System Update
Update BIOS
Identify disc…
OK
OK
OK
Controller Model Memory
Firmware Target
Number
[Utility]
9. System Info.
H0303SV 128MB
V2.02.11 1- 3
ID Number:
123456789ABCDEF
OK
Complete!
OK
