20
Use ▲or ▼ to select device
4.5 Device Information
This option displays the device information of the selected device. The information are listed
as follows.
Model Number
,
Firmware Version
,
Serial Number
,
Power Cycle Count
,
Power-on Hours
,
Reallocation Event Count
,
Offline Scan Uncorrectable Sector Count
,
Seek Error Rate
,
Temperature
.
Use ▲or ▼ to select device
4.6 Log Manager
(HD Pal / HD Pal Pro only)
The duplicator keeps logs in the flash memory of Copy, Compare, Copy+Compare, Erase,
and Format function.10,000 records of log data can be stored. The records of log data for a
task is the number of 1. For example
：
1 to 3 copy task needs 1+3+1=5
records. 3 exFAT format task needs 0+3+1=4 records. The log file is
read only
. Users
cannot modify the log data.
4.6.1 Load Data
Insert a disk into the
target port 1
. The file system of the disk must be FAT32 or exFAT.
Open the file from computer. The file n
ame of log file is “LOG_DATA_XXX.txt”. XXX is from
000 to 999 in sequence. If no log file in the disk, it starts from 000. If 000 is exist in the disk, it
will be added 1 to be 001 and so on. The information in log file is shown below. It was
recorded for 1 to 3 Copy and uses 5 log records.
[Log File]
[Device Information]
2. Firmware Version
[Utility]
5. Device Information
[Device Information]
1. Model Number
OK
OK
Download:
55/500
[Utility]
6.Log Manager
[Log Function]
1.Load Data
OK
OK
Result:
Pass
：
1 Fail
：
0
Download:
Downloading/Toal records
