EZTouchPLC
48 / 64
Changing logging between USB and Micro SD
There are two options to change how the data logging information is saved.
Option #1
Using the Programming Software
1.
Open your project file for the
EZTouchPLC
using the EZTouch
Editor
Software.
2.
Then click
Setup
>
Data Acquisition
to display the DAQ Schedule dialog.
3.
Select either USB Flash Drive or MicroSD card.
4.
Click OK and then save the project.
Option #2
On the
EZTouch I/O Flex
1.
Press the upper left corner of the
EZTouchPLC
screen for a minimum
of
six seconds to access the Setup Mode.
2.
After selecting the appropriate language for the unit, the unit will enter
the Setup Mode (shown below). Press the "LogtoSD" button to change
how the data is logged.
3.
When finished, press Exit to resume normal operations.
Summary of Contents for EZTouch I/O Flex
