Page 39 of 74
4.9.8.
Insert one half of the elbow into the ramp handrail and the other half into the leg of
the handrail extension above the connector plate (FIG. 4.18).
4.9.9.
Center the large hole in the connector plate over the bolt and washer attaching the
lower ramp handrail (or over the second hole from the top if no rail is present) and
reassemble the adjustable elbow.
4.9.10.
Secure the connector plate to the ramp handrail post using a 1/4”-20 x 1” hex washer
head self-drilling screw (FIG. 4.18).
FIG. 4.18
FIG. 4.19
4.9.11.
Attach a BOLT-ON STUB RAIL to the ramp handrail post on the opposite side of the
welded “H”. Center the large hole in the BOLT-ON STUB RAIL over the bolt and
washer attaching the lower ramp handrail (or over the second hole from the top if no
rail is present) and secure using a 1/4”-20 x 1” hex washer head self-drilling screw
(FIG. 4.19).
Summary of Contents for PATHWAY 3G SS06VP
Page 15: ...Page 15 of 74 FIG 2 6 FIG 2 7...
Page 35: ...Page 35 of 74 FIG 4 12 FIG 4 13...
Page 36: ...Page 36 of 74 FIG 4 14 FIG 4 15...
Page 46: ...Page 46 of 74 FIG 5 5...
