ESP-LWQX-1000
22
To connect the projectors to the control PC:
►
Connect the control PC to projector 1 either via a RS232 data cable or via a
KAT.5 Ethernet cable (optional):
Fig. 9: Connecting the projecotrs to the control PC via RS232 data cable
Fig. 10: Connecting the projecotrs to the control PC via ethernet cable
1
2
3
RS232
ADRESSING THE PROJECTORS
To control the projectors and to enable communication, each projector must
be allocated with an individual address. The projectors are addressed with
consecutive numbers.
Fig. 11: Addressing the projectors (ID)
1
2
3
Ethernet
