Eyemax HX-04 User Manual Download Page 45

Page: 45 / 79

SER

’

ANUAL

H.264

EAL

IME

DVR

4) Network

You can set the network environments.

1. [TCP/IP]

You can specify the TCP/IP setting according to network environment.

Specifying the TCP port number of Web, Playback and Live.

Default values: Web(80), Playback(9091), Live(9092)

For dynamic IP or PPPoE

All the items of IP address, subnet mask, gateway and DNS are disabled and set

each value automatically.

For static IP

IP Address: Enter IP address received from ISP using screen keyboard.

Subnet mask: Enter subnet mask received from ISP using screen keyboard.

Gateway: Enter gateway received from ISP using screen keyboard.

DNS: Enter the DNS IP address received from ISP using screen keyboard.

MAC address: This is hardware specific unique address of network device, so user

cannot set this value.

※

8000~65535 port number is recommended.

※

Do not use the same port number with each other.

Web (80), playback (9091), live (9092), CMS (9100)

Summary of Contents for HX-04
















































































Search results

Summary of Contents for HX-04

Reviews:

Related manuals for HX-04

Brands by name

Popular brands

Eyemax HX-04, User Manual

Search results

Summary of Contents for HX-04

Reviews:

Related manuals for HX-04

Brands by name

Popular brands