Eyemax HX-04 User Manual Download Page 27

Page: 27 / 79

SER

’

ANUAL

H.264

EAL

IME

DVR

10. [Previous frame]

It displays previous frame and pause. (1 step backward play)

11. [Fast backward playback]

12. Click this button to playback fast backward. The speed of fast backward playback can be set

to one of the following, X2, X4, X8, and X16.[Stop]

Click this button to stop playback.

13. [Forward playback]

Click this button to playback forward as normal speed.

14. [Fast forward playback]

Click this button to playback fast forward. The speed of fast forward playback can be set

to one of the following, X2, X4, X8, and X16.

15. [Next frame]

It displays next frame and pause. (1 step forward play)

※

System control bar is shown when mouse pointer moves to lower position of

screen, and it is hidden when mouse pointer moves to upper position.

Summary of Contents for HX-04
















































































Search results

Summary of Contents for HX-04

Reviews:

Related manuals for HX-04

Brands by name

Popular brands

Eyemax HX-04, User Manual

Search results

Summary of Contents for HX-04

Reviews:

Related manuals for HX-04

Brands by name

Popular brands