9
kPulley Go Manual v1.2.1
Wall Mounting Instructions
Optional Strap Attachment
To attach the kPulley Go to a pole or a rack, use the
brackets on the back of the beam and the three straps
provided. Alternative straps, up to 50 mm wide, can be
used if you prefer. The kPulley Go can also be mounted
and used outdoors at the user’s discretion.
Step 1
Screw the beam to the wall.
Make sure that the small
screw is at the bottom and that the beam is perfectly
straight.
Step 2
Slide the kPulley Go onto the beam.
Ensure that it runs
smoothly up and down the beam.
Step 3
Attach the flywheel protection and the flywheel knob.
Loosen the two thumb nuts and ensure the shim
washers are
behind
the flywheel protection. Then slide
the flywheel protection into place and tighten the nuts.
Small screw
downwards!