16
kPulley Go Manual v1.2.1
kPulley Go Maintenance
Drive Belt Cautions
Trimming a Worn Drive
Belt
The drive belt and its attachment to the shaft is the most
sensitive part of the kPulley Go.
Be attentive to wear and
check regularly.
When the belt shows signs of wear and tear, trim the end by
cutting off the damaged area or replace it with an original spare
drive belt.
For recommendations on how to prolong the lifespan of your drive
belt, please refer to our videos on best practices, found here:
www.exxentric.com/support/maintenance/
Unwind all of the belt from the shaft and use a small pin to push
the belt through the shaft and remove the lock pin.
Cut off the damaged belt and harden the edge with a lighter
Pull the belt through the shaft from the side with the narrower
groove. Fold the belt around lock pin and pull the belt and pin into
the wider groove in the shaft.
The belt automatically locks into the groove when you pull it firmly.
Make sure you can see the edge of the band when it’s in place in
the shaft (highlighted in third photo above).