Exxentric kPulley Go Manual Download Page 18

18

kPulley Go Manual v1.2.1

Warranty

WARRANTY

Valid from 03-10-2013

1)  THE TERMS AND CONDITIONS’ APPLICABILITY. This Agreement applies only to the sale of products in new condition 

in the EU or in a market where a certified dealer is established. For the individual consumer, warranty runs from 

the original delivery date for 12 months in parallel with a three-year legal guarantee. For trade companies, 

warranty runs for 12 months from the original delivery date and with the conditions set out in this agreement.

2)  PARTIES OBLIGATIONS. Exxentric undertake - with the exception of the cases specified in paragraph 5 below - in 

case of malfunction or damage to the product to replace defective parts. More extensive repairs are to be 

carried out by an Exxentric designated service center.

3)  WHAT CONSTITUTES AN ERROR. Errors are professionally determined deviations from the normal standard that 

manifests itself during the period specified in paragraph 1. The product is considered defective if it differs in 

the manner stated above and is not, according to Exxentric, likely to have been defected due to accident or 

circumstances that are otherwise attributable to the buyer.

4)  TROUBLESHOOTING. Rectification of defects or delivery of replacement parts will take place within a reasonable 

time after the buyer notified the error and, if so requested by Exxentric, made the product available to the 

action of a designated service centre. What is considered a reasonable time is determined by the buyer’s 

need for the product, the nature and scope of the error, difficulties in determining the error and access to 

spare parts and engineering capacity.

5)  LIMITATION OF SELLER / EXXENTRIC’S COMMITMENT. Exxentric’s responsibility does not cover the product’s 

consumable parts and wear parts such as for example drive belts, extension straps, rubber protectors for 

the pulley block, snap hooks, rubber mats and pads. Also, the warranty does not cover what is considered as 

normal wear and tear, normal corrosion, or defects in paint or other coatings. Also, the buyer may not claim 

rectification for deficiencies which the seller can show were caused by for example:

  - that repair or service was done elsewhere than at an authorized Exxentric service center 

  - that non OEM components were used 

  - that use of the product continued after the defect was first noticed 

  - that the product has been used in ways for which it is not designed or sized 

  - that the product has been abused 

  - that the product has not been used with normal care 

  - that the care regulations as per existing instructions have not been carefully observed.

6)  TRANSPORT SAFETY AND TRANSPORTATION EXPENSE. For repair of extensive defects, the purchaser shall bring the 

product to a designated service center. Buyer shall, after the defect has been remedied, pick up the product 

from the seller or the designated service center. The product can also be dispatched by the buyer to the 

seller or to the designated service center. Such transportation shall be at the buyer’s sole risk and expense. 

Replacement parts which the buyer can be expected to  replace on his/her own are delivered free of charge 

to the buyer.

7)  LIMITATIONS OF LIABILITY. For the individual consumer, the limitation of liability as stated in the current applicable 

Consumer sales rules applies. The buyer is therefore not entitled to compensation beyond what is covered 

under (2). For commercial customers, Exxentric’s liability is limited to what is stated in this agreement. The buyer, 

therefore, is not entitled to compensation for economic damages beyond the terms specified above, ie not 

for personal injury or property damage. Buyer is reminded once again the importance of the product being 

handled with care and in accordance with the operating manual’s instructions!

DISPUTES. Disputes concerning the interpretation or application of this Warranty Agreement shall in the first instance 

be resolved by agreement between the parties. If such an agreement can not be reached, the dispute shall be 

settled finally by arbitration at the Stockholm Chamber of Commerce Arbitration Institute (the Institute). The Rules 

for Expedited Arbitrations shall apply unless the Institute with regard to the case, the amount in dispute and other 

circumstances, determines the rules of the Stockholm Chamber of Commerce Arbitration Institute shall apply to 

proceedings. In the latter case, the Institute shall also decide whether the arbitral tribunal shall be composed of one 

or three arbitrators.

Summary of Contents for kPulley Go





















Reviews: