Operating Manual
5
2 Safety Information and Notes
2.1
Storage of this Manual
Keep this user manual safe and in the vicinity of the device. All persons who have to work on
or with the device should be advised on where the manual is stored.
2.2
List of Notes
The notes supplied in this chapter provide information on the following.
•
Danger / Warning.
o
Possible hazard to life or health.
•
Caution
o
Possible damage to property.
•
Important
o
Possible damage to enclosure, device or associated equipment.
•
Information
o
Notes on the optimum use of the device
Warning
The iANT2xx series are classified as simple apparatus when used with an
Extronics iSOLATE501 galvanic isolator. Do not use an iANT2xx antenna
without first contacting Extronics for guidance and recommendations for
the use of the iANT2xx with specific hardware.
Important
Installation of this equipment shall be carried out by suitably trained
personnel in accordance with the applicable code of practice (IEC 60079-
14).
Important
The antennas and associated wiring should be periodically inspected for
damage, in accordance with the applicable code of practice (IEC 60079-
17)
Warning
Antennas which are not marked suitable for Group I in Table 1 must NOT
be used in Group I or Zone 0.
Warning
Aluminium mounting brackets cannot be used in Group I or Zone 0
hazardous areas.
Warning
The iANT2xx antennas are an electrostatic charging hazard; clean only
with a damp cloth. The iANT2xx antennas should have a label stating that
they are an electrostatic hazard.
