extronics iANT100, Operating Manual

Page: 7 / 34

Operating Manual
7
3 General information
3.1 Installation and Function
3.1.1 Parts Enclosed
iANT100
•
1 x Antenna with 1mtr / 5mtr cable
•
1 x M6 x 10 slotted machine screw
•
1 x M6 lock washer
•
1 x Antenna Bracket
•
2 x 1 ¼” x 8 Wood Screws
•
2 x 6mm red rawl plugs
•
2 x self adhesive nylon blocks
•
2 x cable ties
iANT101
•
1 x Antenna with Cable as Ordered
•
1 x Antenna Pipe Mounting Bracket
If any Part is damaged or missing, contact Extronics Ltd
Warning Ensure that the M6 screw used to affix the iANT100 antenna does not
protrude more than 10mm into the antenna through the attachment
bracket. Protrusion greater than 10mm will cause damage to the
antenna.
3.1.2 Antenna Installation Recommendations
It is recommended that the antennas be mounted at least 204mm (8") away from any
metal objects e.g. metal clad walls or girders.
The antennas should be mounted at least 600mm (24") apart for optimal
performance, but will perform well closer together.
Information The iANT100 has optional brackets which allow the antenna to be
mounted directly to Extronics Range of hazardous area access points
Information The iANT101 is supplied with a pipe mounting bracket
Information It is impossible for the straight or right-angled N-type connector fitted to
the iANT100 to pass through an M20 gland entry. Either a larger entry
(for example an M25) should be used, or the connector should be fitted
after gland installation. Select either the gland reducer option or the
connector supplied separately option for the iANT100 as appropriate.
Information It is impossible for the straight N-type connector fitted to the iANT101 to
pass through an M20 gland entry. Either a larger entry (for example an
M25) should be used, or the connector should be fitted after gland
installation. Select either the gland reducer option or the connector
supplied separately option for the iANT101 as appropriate.