extronics iANT100, Operating Manual

Page: 23 / 34

Operating Manual
23
7 Type Codes
7.1 iANT100
iANT100 Zone 1 Omni Directional Antenna iANT100-[#1]-[#2]-[#3]-[#4]-[#5]-[#6]-[#7]-[#8]
Specify option [#1] - Frequency
2.4GHz Frequency 24
5 GHz Frequency 58
GSM Quad-band QB
Specify option [#2] - Cable Length
5m 5
Special cable length S
Specify option [#3] - Connector type
Straight N-type male * 1
Right angle N-type male (Recommended for use with Extronics iWAP103) * 2
Straight reverse-polarity SMA male 3
Right-angle reverse-polarity TNC male 4
Straight reverse-polarity BNC male 5
No connector fitted 6
* N.B. It is impossible for a straight or right-angled N-type connector fitted to the cable to pass through the enclosure entry for an M20
cable gland. Either the connector must be fitted after passing the cable through the enclosure hole, or a larger M 25 enclosure
entry should be used with a suitable thread reducer. This permits the N -type connector to pass through the hole.
Select either option #4 (N) or option#7 (2).
Note that the Extronics iWAP103 is supplied with M25 cable entries and M25 -M20 thread reducers as standard.
Specify option [#4] - Connector fitting
Selected connector fitted F
Crimp connector supplied separately for customer fitting (RG58 crimp tool required) N
Specify option [#5] - Cable Gland
No gland fitted 1
Fitted with CR-UB-NP-16-M20 Ex d cable gland 2
Fitted with CR-UB-NP-16-075-NPT Ex d cable gland 3
Fitted with customer-supplied cable gland 4
Specify option [#6] - Cable Gland Position
Cable gland installed at default distance from antenna
(cable length minus 0.45m)
D
Special cable gland position, specify on order S
(Cable gland must be a minimum of 0.65m from the antenna, and a minimum
of 0.45m is recommended between the gland and connector)
Specify option [#7] - Gland thread reducer supplied
No thread reducer supplied 1
CR-UB-NP-16-M20 Ex d cable gland supplied with M25 - M20 thread reducer 2
Specify option [#8] - Mounting bracket
Supplied with standard aluminium wall mounting bracket 1
Supplied with 316 stainless steel wall mounting bracket 2
Optional Accessories also available separately
316 stainless steel wall mounting bracket iANTMB03