extronics iANT100, Operating Manual

Page: 5 / 34

Operating Manual
5
2 Safety Information and Notes
2.1 Storage of this Manual
Keep this user manual safe and in the vicinity of the antenna. All persons who have to work
on or with the controller should be advised on where the manual is stored.
2.2 Special Conditions for Safe Use
2.2.1 ATEX/IECEx
•
If terminated in the hazardous area, the flying lead shall be installed in an
appropriately-certified enclosure. An example would be termination inside a
flameproof enclosure via a suitable certified flameproof gland.
•
The threshold power of the antenna shall be limited to 2 (two) watts when the
antenna gain is taken into account. Programmable or software control
intended for setting by the user is not permitted.
2.3 List of Notes
The notes supplied in this chapter provide information on the following.
•
Danger / Warning.
o
Possible hazard to life or health.
•
Caution
o
Possible damage to property.
•
Important
o
Possible damage to the device, or associated equipment.
•
Information
o
Notes on the optimum use of the device
Warning! The iANT100/iANT101 enclosure is an electrostatic charging hazard;
clean only with a damp cloth
Important The iANT100/iANT101 may be used in zones 1 and 2 with flammable
gases and vapours with apparatus groups IIA, IIB & IIC and with all
temperature classes.
Important The iANT100/iANT101 may also be used in zones 21 and 22 with all
flammable dusts compatible with the maximum surface temperature of
60

C. The appropriate safety margin should be applied
Important The iANT100/iANT101 is only certified for use in ambient temperatures in
the range -40
o
C to +60
o
C and should not be used outside this range