XTP T VGA Transmitter • XTP System Configuration Software
23
Software Operation
The XTP T VGA can be controlled directly from the front panel configuration port (see
B
on page 13) or remotely from a connected XTP matrix switcher.
Connections
When opening the XTP System Configuration Software, the
Connections
screen opens
first. This screen is used to establish communication with an XTP device through a USB
connection. Ensure the receiver is connected and powered on before attempting to connect
to it.
Figure 15.
Connections Screen
To connect to a device:
1.
Open the XTP System Configuration Software.
2.
From the
Connections
screen in the XTP Configuration Software, select the
USB
radio
button (see figure 15,
1
).
3.
From the displayed list, select the connected device to be controlled (
2
).
4.
Click the
Connect
button (
3
). The
Device Settings
