XTP SR HDMI Scaling Receiver • Operation
19
Input Configuration Submenu
The
Input Configuration
submenu displays the total pixels and horizontal and vertical
active pixels of the input signal.
Figure 13.
Input Configuration Submenu
Total pixels
— Displays the total pixels of the input signal. This is not configurable.
Active
— Displays the active horizontal (H) pixels and vertical (V) lines of the input signal.
These are not configurable.
Output Configuration Submenu
The
Output Configuration
submenu is used to configure of the output resolution and
refresh rate. Output format and color bit depth settings are not configurable from the OSD.
To configure either setting, use SIS commands (see
page 28) or use the XTP System Configuration Software (see
on
page 39).
Figure 14.
Output Configuration Submenu
