XTP SR HDMI Scaling Receiver • Installation
5
ATTENTION:
•
Do not connect this connector to a computer data or telecommunications
network.
•
Ne connectez pas ce connecteur à un réseau de données informatiques ou à
un réseau de télécommunications.
•
XTP remote power is intended for indoor use only. No part of the network that
uses XTP remote power should be routed outdoors (see
on
page 13).
•
XTP à distance est destiné à une utilisation en intérieur seulement. Aucune
partie du réseau qui utilise l’alimentation XTP à distance ne peut être routée en
extérieur (voir
à la page 13).
B
LAN connector
— Connect a control device or device to be controlled to the RJ-45
connector labeled
LAN
(see
B
on the previous page) for 10/100Base-T
Ethernet communication through this pass-through port. LEDs on the connector
indicate link and activity status.
C
RS-232 Over XTP port
— To pass bidirectional serial signals between
XTP-compatible devices, connect a control device to the 5-pole captive
screw connector (see
,
C
on the previous page). The port includes
only the 3 poles labeled “RS-232.”
IR Over XTP port
— To transmit and receive IR signals (up to 56 kHz),
connect a control device to the 5-pole captive screw connector. This port
includes the 2 poles labeled “IR” and shares the ground pole with the
RS-232 port.
NOTE:
RS-232 and IR data can be transmitted simultaneously (see
on page 10 for wiring details).
D
HDMI output connector
— Connect a digital video display to the female HDMI
D
on the previous page). See
on page 15 to mute or unmute embedded audio output. It supports HDMI or
DVI (with an appropriate adapter) signals.
NOTES:
•
The maximum cable length is 15 feet (4.6 meters).
•
Use an Extron LockIt Cable Lacing Bracket to secure the HDMI connector to
the device (see
on page 7).
IR
Tx Rx G
Tx Rx
RS-232
IR
Tx Rx G
Tx Rx
RS-232
